Plastic Balls Plastic Bars Plastic Discs Hose Plastic Rods Plastic Sheets
Plastic Tubes Plastic Hex Rods Plastic Angles Plastic U Channels Tube Caps and Plugs Welding Rods


Cycolac EX58
Physical Nominal Values  (English)  Test Method
  Density -Specific Gravity   1.03   sp gr 23/23°C   ASTM D792
  Mold Shrink, Linear-Flow (0.125 in)   0.0060 to 0.0080   in/in   ASTM D955
Mechanical Nominal Values  (English)  Test Method
  Tensile Modulus    302000   psi   ASTM D638
  Tensile Strength @ Yield    5800   psi   ASTM D638
  Tensile Strength @ Break    4400   psi   ASTM D638
  Tensile Elongation @ Yld    3.1   %   ASTM D638
  Tensile Elongation @ Brk   32   %   ASTM D638
  Flexural Modulus (2.00 in Span )   314000   psi   ASTM D790
  Flexural Strength @ Yield (2.00 in Span )    9700   psi   ASTM D790
Impact Nominal Values  (English)  Test Method
  Notched Izod Impact ASTM D256
    (-22 °F)   5.60   ft-lb/in    
    (73 °F)   8.10   ft-lb/in    
  Instrumented Dart Impact (73 °F)   Total Energy: 330   in-lb   ASTM D3763
Thermal Nominal Values  (English)  Test Method
  DTUL @264psi - Unannealed (0.125 in)   177   °F   ASTM D648
  DTUL @66psi - Unannealed (0.125 in)   200   °F   ASTM D648
  Vicat Softening Point (Rate B)   224   °F   ASTM D1525
  CLTE, Flow (-40 to 100°F)   5.6E-005   in/in/°F   ASTM D696
  CLTE, Transverse (-40 to 100°F)   5.8E-005   in/in/°F   ASTM D696
Ignition Characteristics Nominal Values  (English)  Test Method
  UL File Number   E121562      
  Flame Rating - UL (0.0600 in)   HB     UL 94
UL 746 Nominal Values  (English)  Test Method
  Rel Temp Indx Mech w/oImp   140   °F   UL 746
  Rel Temp Indx Mech w/Imp   140   °F   UL 746
  Rel Temp Indx Elect   140   °F   UL 746