Plastic Balls Plastic Bars Plastic Discs Hose Plastic Rods Plastic Sheets
 
Plastic Tubes Plastic Hex Rods Plastic Angles Plastic U Channels Tube Caps and Plugs Welding Rods

CELCON® M90
Property
Method
Value
Units
Physical Properties      
   Density ISO 1183 1410 kg/m^3
   Melt volume rate (MVR) ISO 1133 8.5 cm^3/10min
   Mold shrinkage - parallel ISO 294-4 2.2 %
   Mold shrinkage - normal ISO 294-4 2.0 %
   Water absorption (23°C-sat) ISO 62 0.65 %
   Humidity absorption (23°C/50%RH) ISO 62 0.2 %
 
Mechanical Properties      
   Tensile modulus (1mm/min) ISO 527-2/1A 2780 MPa
   Tensile stress at yield (50mm/min) ISO 527-2/1A 66 MPa
   Tensile creep modulus 1h ISO 899-1 2450 MPa
   Tensile creep modulus 1000h ISO 899-1 1350 MPa
   Flexural modulus (23°C) ISO 178 2640 MPa
   Charpy notched impact strength @ 23°C ISO 179/1eA 5.8 KJ/m^2
   Notched impact strength (Izod) @ 23°C ISO 180/1A 5.5 KJ/m^2
 
Thermal Properties      
   Melting temperature (10 C/min) ISO 11357-1,-2,-3 165 °C
   DTUL @ 1.8 MPa ISO 75-1, -2 100 °C