Tapes - Skived and Rolls

 

 

ABS-
ACETAL (POM)
ACRYLIC (PMMA)
Carbon Fiber
Cellulose Acetate and Butyrate
CPVC

ETFE
EVA
Films
FIBERGLASS FRP
Fluorpolymers

Fluorosint®

 

Graphite
HDPE (High Density Polyethylene)
Hytrel Sheets®

Kapton®

 
Kevlar®
KYDEX®  FR Sheets
Laminates - Phenolics -Micarta  
LDPE (Low Density Polyethylene)
MDPE (Medium Density Polyethylene)
Mylar® 
Neoprene® 
Nomex Film®
Norprene®
Noryl®
Nylon
PBI
PBT
PCTFE
Peek
PetG - PetP
PES Plastic Sheet

PFA
Polycarbonate
Polyester
Polyimide-Vespel, Cirlex, Pyropel 
Polypropylene
Polystyrene (HIPS)
Polysulfone
Polyurethane

 
PPS
PVC
PVDF
Rubber
Santoprene TPE
Silicone
Sintimid 
TEFLON®  

Torlon
TPX Films
Tygon Tubing

 
UHMWPE
Ultem

Texas Longhorns

Contact Kmac Plastics

Privacy

 

Domestic Selling Policy

Square Watermelon Cases

Tube Caps & Plugs

 

Product Characteristics-Noryl GFN3
Material Status
  • Commercial: Active
  
Availability
  • North America
   
Test Standards Available
  • ASTM
   
Filler/Reinforcement
  • Glass fiber reinforcement, 30 % by Weight
Uses
  • Plumbing Parts
   
Agency Ratings
  • NSF Unspecified Rating
Automotive Specifications
  • CHRYSLER MSDB 424
Multi-Point Data
  • Coefficient of Thermal Expansion vs. Temperature (ASTM E831)
  • Elastic Modulus vs Temperature (ASTM D4065)
  • Flexural DMA (ASTM D4065)
  • Instrumented Impact (Energy) (ASTM D3763)
  • Instrumented Impact (Load) (ASTM D3763)
  • Pressure-Volume-Temperature (PVT - Zoller Method)
  • Shear DMA (ASTM D4065)
   
  • Specific Heat vs. Temperature (ASTM D3417)
  • Tensile Creep (ASTM D2990)
  • Tensile Fatigue
  • Tensile Stress vs. Strain (ASTM D638)
  • Thermal Conductivity vs. Temperature (ASTM E1530)
  • Viscosity vs. Shear Rate (ASTM D3835)
Properties 
Physical Nominal Values  (English)  Test Method
  Density -Specific Gravity   1.28   sp gr 23/23°C   ASTM D792
  Mold Shrink, Linear-Flow (0.125 in)   0.0010 to 0.0040   in/in   ASTM D955
  Water Absorption @ 24 hrs (73 °F)   0.060   %   ASTM D570
Mechanical Nominal Values  (English)  Test Method
  Tensile Strength @ Break     15000   psi   ASTM D638
  Tensile Elongation @ Brk    5.0   %   ASTM D638
  Flexural Modulus (4.00 in Span )     1040000   psi   ASTM D790
  Flexural Strength @ Yield (4.00 in Span )     23500   psi   ASTM D790
Impact Nominal Values  (English)  Test Method
  Notched Izod Impact ASTM D256
    (-40 °F)   1.80   ft-lb/in    
    (73 °F)   2.20   ft-lb/in    
Hardness Nominal Values  (English)  Test Method
  Rockwell Hardness (L-Scale)   108     ASTM D785
Thermal Nominal Values  (English)  Test Method
  DTUL @264psi - Unannealed (0.250 in)   280   °F   ASTM D648
  DTUL @66psi - Unannealed (0.250 in)   317   °F   ASTM D648
  CLTE, Flow (-40 to 200°F (-40 to 93°C))   1.4E-005   in/in/°F   ASTM D696
Electrical Nominal Values  (English)  Test Method
  Dielectric Strength (In Oil, 0.125 in)   550   V/mil   ASTM D149
  Dielectric Constant (60 Hz)   2.930     ASTM D150
  Dissipation Factor (60 Hz)   0.00090     ASTM D150
  Arc Resistance (PLC) (Tungsten Electrode, 0.125 in)   PLC 7     ASTM D495
Ignition Characteristics Nominal Values  (English)  Test Method
  UL File Number (USA)   E121562      
  Flame Rating - UL (0.0580 in)   HB     UL 94
  Limiting Oxygen Index   26   %   ASTM D2863
UL 746 Nominal Values  (English)  Test Method
  Rel Temp Indx Mech w/oImp   194   °F   UL 746
  Rel Temp Indx Mech w/Imp   194   °F   UL 746
  Rel Temp Indx Elect   194   °F   UL 746
  Comparative Tracking Index (CTI) (PLC) (0.125 in)   PLC 4     UL 746
  High Voltage Arc Tracking Rate (HVTR) (PLC) (0.125 in)   PLC 3     UL 746
  Hot-wire Ignition (HWI) (PLC) (0.125 in)   PLC 4     UL 746
  High Amp Arc Ignition (HAI) (PLC) (0.125 in)   PLC 4     UL 746
Additional Properties
  CSA (See File for complete listing), CSA LISTED: LS88480 File No.
 

 

 

 

 

 

Steel Metal Balls

Tube Caps & Plugs

Springs

Eyebolts

Threaded Rods

Carriage Bolts

Dowel Pins

Lag Screws

Self Drilling Screws

Spring Pins

Drill Bits

Set Screws

Taper Pins

Wood Screws

Sheet Metal Screws

Tapping Screws

Machine Screws

Channels

Felt Discs, Sheets, Strips

 

K-Mac Plastics  3821 Clay Ave. SW, Wyoming, MI  49548

   Contact Kmac Plastics

Privacy

Domestic Selling Policy

Goods and services provided by K-mac Plastics (MI, USA).
Sold by 2CheckOut.com Inc. (Ohio, USA).

Acrylic Pig Show Pipes

Circuit Breakers, UHMW Sheets, Composite Sheets, Pinewood Derby Cars, Steel Plates, Rods, Tubes, Bars, Wooden Puzzle Boards